Tab Mount Cable Management Bracket Installation Guide

Preparing for Installation

1.1 Audience

This guide is intended for HP service representatives and other persons trained to

install hardware options in the HP 10000 and 15000 series racks. Such persons are

expected to understand the hazards of working in this environment and to take

suitable precautions to minimize danger to themselves and others.

1.2 Documentation Resources

You can download the documentation

for components referenced in this installation

guide from the following locations

• HP 10000-series rack (Documentation option):

http://h18004.www1.hp.com/products/servers/proliantstor-

age/racks

•HPClusterPlatform:

http://www.hp.com/techservers/clusters/xc_clusters.html

1.3 Kit Description

The cable management bracket d

escribedinthismanualisdesignedtoalignand

support cables that lead from a

cluster’s system interconnect to the PCI interface

card installed in each server

(node). The bracket provides strain relief for the PCI

port and ensures a good connec

tion. It also ensures the correct bend radius for the

cable and provides attachm

ent points for cable routing and cable management. A

kit is required for every s

erver that contains a PCI interface card for the system

interconnect.

_________________________ Note _________________________

This bracket is designed to support different types of cables, from

5/16-inch (7.9-mm) minimum diameter to 5/8-inch (15.9-mm) maximum

diameter. Consult the documentation supplied with your cluster before

installing the brackets and routing the cables.

1.4 Kit Contents

The kit contains the f

ollowing components:

• The bracket shown in Figure 1-1.

Preparing for Installation 1-1