Tab Mount Cable Management Bracket Installation Guide

• Packaging and documentation.
To prevent screws from becoming loose because of vibration, HP recommends
that you use an adjustable torque driver set to the torque specifications given in
Table 1-1. Contact your HP sales representative if any parts are missing.
1.5 Required Resources
To install the kit, you require the followi
ng resources:
•Tools:
- Screwdriver, Torx (T15).
- Screwdriver, #2 (medium) Phillips.
- Cage-nut insertion tool (shipped with the rack) or a flat-bladed screwdriver.
- Marker pen or masking tape.
• Resources: A sample cable of the type used
by the system interconnect.
•Environment:
- A work surface adjacent to the rack.
- A stable work platform or step stool that
enables you to safely reach the
servers installed in the upper part of t
he rack.
Preparing for Installation 1-3