The Network and InfiniBand Cable Management Harness Installation Guide (572559-doc)

Note:
This network and InfiniBand cable management harness might also be adaptable for other cable
management solutions (consult your hardware installation documentation).
1.5 Required Resources
To install the network and InfiniBand cable management kit, you require the following resources:
• Tools:
— Screwdriver, #2 (medium) Phillips
— Cage-nut insertion tool (shipped with the rack)
— Marker pen or masking tape
• Resources: Network cables of the type used in the HP configuration that you are installing
1.6 Prerequisites
Before you begin to mount the harness:
• Follow the usual cable-handling precautions for network cables and InfiniBand cables
• Ensure that you know how to plug in the cables
• Read the rack installation instructions for all of the devices installed in the rack
• Obtain the set of cabling tables required for your HP configuration
1.5 Required Resources 9