XC3000 Cluster HP XC Interconnect xx3020 Cabinet Kit Installation Guide

Figure 1: Left Bracket Retainer
ZK-2046
This bracket has a flange by which you attach it to the support track. Figure 2
shows the right-hand bracket.
Figure 2: Right Bracket Retainer
ZK-2067
This bracket has a flange by which you attach it to a rack column.
• A single hold-down bracket that connects the rear of the interconnect chassis to
a track. The bracket contains two threaded inserts and has a flange by which
you attach it to the interconnect’s chassis. See Figure 3.
Figure 3: Hold-Down Bracket
ZK-2068
• A blanking panel that you attach to the front of the rack, covering the rear of
the interconnect. This panel has a cutout for the air duct inlet and it maintains
the correct airflow within the rack. See Figure 4.
Figure 4: Blanking Panel
ZK-2069
• A set of eight fabric straps with hook-and-loop closure. Use the straps to bundle
and route cables from the interconnect to cluster nodes. See Figure 5.
2 HP XC Interconnect xx3020 Cabinet Kit Install Guide