XC3000 Cluster HP XC Interconnect xx3020 Cabinet Kit Installation Guide

the interconnect’s original bracket. The correct orientation of the bracket is
with its flange facing inward toward the interconnect’s ports, as shown in
Figure 8.
Figure 8: Mounting the Left-Hand (Angled) Bracket on the Interconnect
Chassis
ZK-2043
3. Mount the right-hand bracket retainer to the interconnect’s chassis. Use five
of the countersunk flat-head screws from the interconnect’s original bracket.
The correct orientation of the bracket is with its flange facing outward, as
shown in Figure 9.
Figure 9: Mounting the Right-Hand Bracket on the Interconnect Chassis
ZK-2071
4. When the brackets are assembled, mount the tracks on the rack columns.
The orientation of the tracks is shown in Figure 10. The threaded inserts
indicated by callout 1 are the attachment points for the interconnect’s
left-hand (angled) bracket.
6 HP XC Interconnect xx3020 Cabinet Kit Install Guide