XC3000 Cluster Quad Bracket Kit Installation Guide

Figure 1-3: Installing the Right-Hand Quad Bracket in the Rack
Right-Hand Bracket
Viewed from the Front of the Rack
3
2
6. Repeat this procedure for the left-hand quad bracket.
10 Mounting the Slides to the Server
Attach the mounting slides to the server as follows:
1. Identify the left-hand mounting slide, as shown in Figure 1-2. Ensure that the
cut-out is toward the rear of the server.
2. Position the keyhole slots over the raised posts in the side of the case, as
shown in Figure 1-4.
Figure 1-4: Installing the Left-Hand Mounting Slide on the Server
1
2
3. Holding the server to prevent it from moving, push the slide mount toward the
front bezel of the server until the slide mount clicks into position.
4. Repeat steps 1 to 3 for the right-hand mounting slide.
Quad Bracket Kit Installation Guide 1-5