XC6000 Cluster Cable Management Basket Installation Guide

• The fasteners specified in Table 1-1.
Table 1-1: Cable Management Tray Fasteners
Qty Size
Type Torque Description
10
M6 X 10 mm Phillips
(Posidrive)
30 in-lb Machine screw, pan-head
10
M6 Cage nut As for the
fastener
Clip-mounted nut for the rack’s
square mounting holes
• Packaging and documentation.
To prevent screws from becoming loose due to vibration, HP recommends that you
use an adjustable torque driver set to the torque specifications given in Table 1-1.
Contact your HP sales representative if any parts are missing.
5 Orienting the Components
A cable management basket is required for every interconnect building block
(IBB) that contains an HP XC Interconnect xx6020, in which the interconnect is
installed in the upper part of the rack. A different cable management system is
used for interconnects installed in the lower part of the rack. Do not use the cable
management basket on installations in the lower part of the rack.
Each interconnect supports many connections consisting of heavy multicore
copper cable that has a limited bend radius. The cable management basket
supports the cable, providing strain relief for the connection ports in the HP XC
Interconnect xx6020, and ensures a good mechanical connection to the port. It also
provides sufficient space to accommodate a number of cables without exceeding
the minimum bend radius for the cable.
Figure 1-1 shows the kit components and the correct orientation of the Cable
Management Tray toward the rack.
1-2 Cable Management Basket Installation Guide