Gigabit Ethernet Interconnect Guide

Note:
The 4–port 10-GbE CX4 Module requires switch software version K.11.3x or greater to be installed
in the switch.
Note:
When ProCurve 5400-series are aggregated, the configuration employs only the 4-port 10-GbE
CX4 modules.
6.5 ProCurve 5400zl Series LEDs
Refer to the Installation and Getting Started Guide for the ProCurve Series 5400zl Switches for
information on LEDs and performing diagnostics.
6.6 Installing a ProCurve 5400zl Series in a Rack
In HP Cluster Platform solutions, ProCurve 5400zl series are shipped integrated in the rack.
Refer to the Installation and Getting Started Guide for the ProCurve Series 5400zl Switches and the
Rail Mounting Kit Installation Instructions for the ProCurve Series 5400zl Switches – Part Number:
5991-3788.
6.7 Replacing a ProCurve 5400zl Series
To replace the ProCurve 5400zl, reverse the installation procedures described in the Installation
and Getting Started Guide for the ProCurve Series 5400zl Switches.
6.5 ProCurve 5400zl Series LEDs 53