Gigabit Ethernet Interconnect Guide

10 HP GbE2c Ethernet Blade Switch for c-Class BladeSystem
The HP GbE2c Ethernet Blade Switch for the c-Class BladeSystem (see Figure 10-1) provides a
full set of industry standard Gigabit Ethernet Layer 2 features, sixteen internal downlinks, five
uplinks and two internal cross-connects in a single low cost blade solution.
Figure 10-1 HP GbE2c Ethernet Blade Switch for c-Class BladeSystem
1
32
4
5
6
The following list corresponds to the callouts shown in Figure 10-1.
1. Reset Button
2. Health LED
3. UID LED
4. DB-9 Serial Management Port
5. RJ-45 1Gb Uplink Ports
6. Release handle
10.1 Replacing the GbE2c Ethernet Blade Switch
Refer to the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem User Guide, the GbE2c Ethernet
Blade Switch for HP c-Class Quick Setup Instructions and the HP BladeSystem c-Class Maintenance
and Service Guide for installation and replacement procedures.
10.1 Replacing the GbE2c Ethernet Blade Switch 71