HP Cluster Platform InfiniBand Interconnect Installation and User's Guide

A ISR 9024 Interconnect Specifications
The IBTA 1.1 compliant InfiniBand technical specifications of the ISR 9024 are as follows:
Technical SpecificationFeature
InfiniBand Ports
4X and/or 12X factory configurable copper ports
Up to 24 4x (10 Gb/s) InfiniBand non-blocking full-wire speed ports
140-nanosecond single-hop port to port switching latency
Overall throughput of up to 480 Gb/s.
Interconnect options: copper, optical
Indicators: physical and logical status
Management
Externally or internally managed switch supported by modular architecture
Fabric management
Power PC440 core CPU, operating at 400 MHz
EIA/TIA-232 console, I²C and RJ-45 Ethernet indicators and ports
ndicators: unit status, subnet management
Linear forwarding table: 48K entriesSwitch Specifications
Multicast table size: 1K entries
Data virtual lanes: 8
MTU: 4096 bytes maximum
Power and Cooling
One or two factory installed Power SuppliesSupply
Optional second Power Supply in case single Power Supply is factory installedSupply option
with optical adapters – 55 Watt (maximum)Wattage
Internally managed – 32.5 Watt
Externally managed – 24.5 Watt
100-240V AC, 50/60 Hz auto-sensingOperating voltage
Passive, no fansCooling
32°F to 113°F (0°C to 45°C)Operating Temperature
Physical
1.69" (43 mm) x 17.56" (446 mm) x 20.59" (523 mm)Dimensions (H x W x D)
14U (1.75 x 14 in = 24.5” (622.3 mm))Vertical rack space
19” (482.6 mm)Rack column width
Optional front or rear rack mounting
17 lb (7.7 kg), excluding rack mountingWeight
Reliability
over 250,000 hoursInternally managed
111