HP Cluster Platform InfiniBand Interconnect Installation and User's Guide

SpecificationFeature
You can install up to three of the following InfiniBand form factor router blades in each
router blade drawer (sRBD):
• FCR InfiniBand form factor for integration with ISR 9288 and OEM system:
— Four 1G/2G Fiber Channel ports
— RJ-45 port for management
— Indicators:
◦ two InfiniBand link/activity LEDs
◦ four Fiber Channel activity LEDs
◦ system LED
◦ Management link LEDs.
— blade reset button
• IPR InfiniBand form factor for integration with ISR 9288 and OEM systems:
— Four interfaces, IEEE 802.3ab, and 802ad (link aggregation) compliant
— Connectors:
◦ Four ports of either of the following type: 1000BASE-SX mini-GBIC RJ-45 or
optic (SMF)
◦ RJ-45 for management
— Indicators:
◦ Two InfiniBand link/activity LEDs
◦ Four GbE link/activity LED
◦ System LED
◦ Management link LEDs.
— Blade reset button
Router Blades
• Connectors: EIA/TIA-232 Console DB-9 and 10/100Ethernet RJ45
• Indicators:
— Subnet manager activity (2 LEDs)
— Chassis management activity (2 LEDs)
— Fabric boards (4 LEDs)
— Temperature LED.
• Management/device reset button
Control (rear)
• Consumption is 2,500W maximum (full configuration).
• Operating voltage 85-240V AC, 50/60 Hz auto-sensing.
• One to five power supply Modules with N:1 or N:N redundancy.
• Indicators
— Operational AC and DC
— Status LEDs
Power Requirements
• Front-to-back airflow by active fan.
• Heat dissipation is 8000 BTU/Hour maximum for a full configuration.
Cooling Air Flow
• Optional front or rear rack mounting.
• 19 inches rack width requirement.
• 14U rack space height requirement.
• Chassis dimensions:
— Width 17.5" (444 mm).
— Depth 22.75" (578 mm).
— Height 25.4" (622 mm).
Dimensions
120 ISR 9288 Interconnect Specifications