HP Cluster Platform InfiniBand Interconnect Installation and User's Guide

6. Remove the chassis from the box and place it on a flat surface.
7. Open any additional boxes and remove the items inside. Verify the contents, which depend
on the configuration of your cluster.
4.2.2 Unpacking the ISR 9096
Use the following procedure to unpack the ISR 9096 container:
1. Remove the top cover of the box.
2. Verify that the top compartment (see Figure 4-4) contains the following components:
1. Cabling Guide brackets (these brackets are not used for HP Cluster platform
installations).
2. Small cardboard box for accessories.
3. Packing foam.
4. Packing list.
5. Documentation.
Figure 4-4 Top Compartment in the ISR 9096 Box
3
4
1
3
2
4
DescriptionItem
Accessories box1
Packing list2
Cabling brackets3
Getting Started Short Guide4
3. Remove the accessories box (Figure 4-5) from the crate and verify that it contains the following
items:
• A CD with documentation and software utilities
• Console cable.
• Ground stud kit.
• Tray screws kit for the rail.
• Power cable.
4.2 Unpacking the Chassis 55