Quadrics QsNetII Interconnect

xc4n15: tping -f gex 8k
xc4n16: duplex ping complete
xc4n16: tping -f gex 8k
xc4n12: duplex ping complete
xc4n12: tping -f gex 8k
xc4n12: duplex ping complete
xc4n12: tping -f gex 8k
xc4n13: duplex ping complete
xc4n13: tping -f gex 8k
xc4n14: duplex ping complete
xc4n14: tping -f gex 8k
xc4n14: duplex ping complete
xc4n14: tping -f gex 8k
0: 163840 bytes 1086.38 uSec 301.62 MB/s
1: 163840 bytes 1086.38 uSec 301.62 MB/s
2: 163840 bytes 1086.38 uSec 301.62 MB/s
3: 163840 bytes 1086.39 uSec 301.62 MB/s
4: 163840 bytes 1086.38 uSec 301.62 MB/s
5: 163840 bytes 1086.38 uSec 301.62 MB/s
6: 163840 bytes 1086.38 uSec 301.62 MB/s
7: 163840 bytes 1086.38 uSec 301.62 MB/s
8: 163840 bytes 1086.39 uSec 301.62 MB/s
9: 163840 bytes 1086.39 uSec 301.62 MB/s
xc4n12: global exchange complete
xc4n14: global exchange complete
xc4n12: qsnetsoak complete
xc4n13: global exchange complete
xc4n13: qsnetsoak complete
xc4n14: qsnetsoak complete
xc4n15: global exchange complete
xc4n15: qsnetsoak complete
xc4n15: global exchange complete
xc4n12: global exchange complete
xc4n13: global exchange complete
xc4n15: qsnetsoak complete
xc4n14: global exchange complete
xc4n12: qsnetsoak complete
xc4n13: qsnetsoak complete
xc4n14: qsnetsoak complete
xc4n16: global exchange complete
xc4n16: qsnetsoak complete
xc4n16: global exchange complete
xc4n16: qsnetsoak complete
12.11 Testing and Verifying Replaceable Modules
Use the procedures described in this section to test and verify replaceable
components if you suspect an error. If your cluster has a reduced bandwidth
configuration, you must incorporate the following rules into the tests:
• Reduced bandwidth, 128-way bounded interconnect:
If there are both QM511C and QM511L switch cards present in the
interconnect, it is a reduced bandwidth configuration. You must apply the
following rules when running the tests:
- Level 1 test: Perform this test on all nodes.
- Level 2 test and Level 3 test: Perform these tests only on nodes with an
even-numbered node ID (2, 4, 6, to N nodes in the cluster).
• Reduced bandwidth, federated interconnect:
- Level 1 test and level 2 tests: Perform these tests on all node IDs.
- Level 3 test and Level 4 test: The test pattern organizes node IDs into
groups of 4, and you test only every other 4 nodes beginning with node 0.
Table Table 12-2 shows the first 6 groups of node IDs in the test progression.
You must follow this test pattern progression up to the total number of
nodes in the cluster.
Table 12-2: Node ID Pattern for Testing Reduced Bandwidth Clusters
Node ID Group Test Status
Maintenance and Diagnostic Procedures 12-21