Quadrics QsNetII Interconnect

Chapter 8 Explains how to install the QS32A 16/32-port chassis and install
field-replaceable modules in the interconnect chassis.
Chapter 9 Provides procedures for postinstallation configuration and
installation verification of the interconnect.
Chapter 10 Identifies the signal LEDs on Quadrics interconnect module, and
describes the status information provided by the LEDs.
Chapter 11 Explains how to access and use the interconnect control menu.
Chapter 12 Describes diagnostic procedures and system tests.
Chapter 13 Provides troubleshooting procedures for nodes and links,
including the QM500 PCI card.
Appendix A
Lists the components required for a cluster of a given node count.
Appendix B Lists the field-replaceable components.
Appendix C
Provides cluster component specifications.
Appendix D Provides sample out put from the
qselantest diagnostic command.
Related Documentation
The documents identified in the following sections might be useful as additional
references when planning the installation of an HP Cluster Platform.
HP Cluster Platform Documentation
HP Cluster Platform documentation is delivered on CD-ROM for viewing or
for printing. Printed bound books are not available. HP XC System Software
documentation and related product information is available on line at the following
URL:
http://www.hp.com/techservers/clusters/xc_clusters.html.
The typical HP Cluster Platform documentation set contains both cross-platform
and platform-specific documents, as well as supplementary documents available
at the time of release.
Cross-Platform Documents
Cross-platform documents are the following:
• Cluster Platform Customer Letter
• Cluster Platform Overview
• Cluster Platform Site Preparation Guide
• Core Components
• Server Overview
Platform-Specific Documents
Platform-specific documents are the following:
• A platform roadmap
• One or more system interconnect guides
• A set of cabling tables
• One or more bracket installation guides
iv About This Manual