Quadrics QsNetII Interconnect

Use the following procedure to install the enclosure in the rack:
1. Unpack the interconnect enclosure and the rack mounting kit, ensuring that
all components and fasteners are present.
2. Attach a bracket to each side of the interconnect enclosure using the 16 screws
supplied, setting the position of the bracket as shown in Figure 7-2.
Figure 7-2: Attaching the Bracket to the Enclosure
29.12
29.12
28.12
28.12
25.00
25.00
3. Secure the front slides to the rack columns as shown in Figure 2-3 using six
cage nuts, bolts, and washers (three per slide), as shown in Figure 7-3.
Figure 7-3: Attaching the Tray Kit to the Rack
Front of the Rack
Rear of the Rack
4. Slide the tray onto the front slides and then fit the rear slides into the tray
until they are flush with the rear rack columns.
5. Secure the rear slides to the rear rack columns using six cage nuts, bolts,
and washers (three per slide).
Installation and Maintenance of the 128-Port Interconnect 7-3