Quadrics QsNetII Interconnect

be 650M/S, replace the clock distribution cables that are connected to
each interconnect.
c. Replace the link cable.
d. Replace the switch card in the top-level interconnect.
e. Replace the switch card in node-level interconnect.
By the end of this procedure, you will have isolated and replaced the faulty
component. The green LEDs on the switch card in the node-level interconnect and
on the switch card in top-level interconnect are now illuminated, indicating a good
connection from the node-level interconnect to the top-level interconnect.
Using Component LEDs 10-9