HP Cluster Platform Server and Workstation Overview

Loosen the two captive thumbscrews that secure the assembly to the chassis, as shown
by callout 1 in Figure 3-12.
Figure 3-12 Removing the HP ProLiant DL145 G2 PCI Card Cage
1
1
2
a.
b. Lift the assembly away from the chassis, as shown by callout 2 in Figure 3-12.
c. Identify the slot that is compatible with the expansion board you intend to install.
d. If you are adding an expansion board, pull out the slot cover from the selected slot.
Store it for reassembly later. Figure 3-13 shows how to remove the cover from a
low-profile expansion slot, and Figure 3-14 shows how to remove the cover from a
standard height, full-length expansion slot.
Important:
Do not discard slot covers. If the expansion board is removed in the future, the slot
cover must be reinstalled to maintain proper cooling.
Figure 3-13 Removing the Cover of the Low-Profile Expansion Slot
HPTC-0140
108 Opteron Processor Servers