HP Cluster Platform Server and Workstation Overview

7. Lift and remove the appropriate PCI riser board assembly from the chassis as follows:
Figure 3-22 Removing the HP ProLiant DL145 G3 Full-Sized PCI Riser Board Assembly
1
1
2
Figure 3-23 Removing the HP ProLiant DL145 G3 Low-Profile PCI Riser Assembly
1
1
2
a. Loosen the two captive thumbscrews that secure the assembly to the chassis, as shown
by callout 1 in Figure 3-22 and Figure 3-23.
b. Lift the assembly away from the chassis as shown by callout 2 in Figure 3-22 and
Figure 3-23.
c. If you are adding an expansion board, pull out the slot cover from the selected slot.
Store it for reassembly later.
Important:
Do not discard slot covers. If the expansion board is removed in the future, the slot
cover must be reinstalled to maintain proper cooling.
118 Opteron Processor Servers