HP Cluster Platform Server and Workstation Overview

3. Remove the installed riser board from the riser board assembly as shown in Figure 3-24 and
Figure 3-25.
Figure 3-24 Remove the Full-Sized Riser Board
1
1
2
Figure 3-25 Remove the Low–Profile Riser Board
1
1
2
Note:
Keep the two screws you remove in this step for installing the new riser board later.
a. Remove the two screws securing the riser board to the assembly.
b. Remove the riser board from the assembly.
To install a new riser board, reverse the removal procedure.
3.2.6 Replacing a PCI Expansion Card in the ProLiant DL145 G3
To replace a PCI expansion card, follow these steps:
120 Opteron Processor Servers