HP Cluster Platform Server and Workstation Overview

Figure 3-27 Removing a Low-Profile PCI Card in the HP ProLiant DL145 G3
To install a PCI expansion board, reverse the removal procedure. Insert the new PCI card into
the riser cage, applying even pressure to seat the board securely. Be sure the adapter is fully
seated.
For more information, refer to the following documents:
• HP ProLiant 100 Series Servers User Guide
• HP ProLiant DL145 Generation 3 Server Maintenance and Service Guide
3.3 HP ProLiant DL165 G5
The HP ProLiant DL165 G5 supports up to two AMD Opteron 2300 series Quad-Core processors
and up to four SATA hot plug or non-hot plug midline and entry hard drives. The ProLiant
DL165 G5 can be used as a control node, utility node, and a compute node in HP Cluster Platform
configurations.
For the features and specifications of the HP ProLiant DL165 G5, go to:
http://h18004.www1.hp.com/products/quickspecs/13015_na/13015_na.html
Figure 3-28 shows the front view of the HP ProLiant DL165 G5.
Figure 3-28 HP ProLiant DL165 G5 Front View
1
11
2 43 5 6 7 8
10 9
The following list describes the callouts shown in Figure 3-28:
1. Thumbscrews for rack mounting
2. Optical disk drive bay
3. Serial number pull tab
122 Opteron Processor Servers