HP Cluster Platform Server and Workstation Overview

Figure 3-57 Unlock the ProLiant DL585 G2 Access Panel Latch
1
2
3
3. Lift up on the latch and remove the access panel.
To replace the access panel, place the panel on top of the server with the latch open. Allow the
panel to extend past the rear of the server approximately 1.25 cm (0.5 in). Push down on the
latch. The access panel slides to a closed position.
To return an HP ProLiant DL585 G2 server into a rack, press the rail-release levers at the front
of both server rails and slide the server into the rack, as shown in Figure 3-56. Secure the server
by snapping in the release latches.
3.8.2 Replacing a PCI Card
Figure 3-58 shows the HP ProLiant DL585 G2 PCI expansion slots.
3.8 HP ProLiant DL585 G2 149