HP Cluster Platform Server and Workstation Overview

Figure 4-24 Removing a ProLiant BL460c from the c–Class Enclosure

4. Place the server blade on a flat, level work surface.

Warning!

To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system

components to cool before touching them.

Caution:

To prevent damage to electrical components, properly ground the server blade before beginning

any installation procedure. Improper grounding can cause electrostatic discharge.

To install and power up a server blade, reverse the removal procedure. The Onboard

Administrator initiates an automatic power-up sequence when the server blade is installed. If

the default setting is changed, use one of the following methods to power up the server blade:

• Use a virtual power button selection through iLO 2.

• Press and release the Power On/Standby button.

When the server blade goes from the standby mode to the full power mode, the system power

LED changes from amber to green.

For more information about the Onboard Administrator, see the HP BladeSystem c7000 Enclosure

Setup and Installation Guide at:

http://h71028.www7.hp.com/enterprise/cache/316682-0-0-0-121.html.

The iLO 2 subsystem is a standard component of selected ProLiant servers that provides server

health and remote server manageability. The iLO 2 subsystem includes an intelligent

microprocessor, secure memory, and a dedicated network interface. This design makes iLO 2

independent of the host server and its operating system. The iLO 2 subsystem provides remote

access to any authorized network client, sends alerts, and provides other server management

functions. Using iLO 2, you can:

• Remotely power up, power down, or reboot the host server.

• Send alerts from iLO 2 regardless of the state of the host server.

• Access advanced troubleshooting features through the iLO 2 interface.

• Diagnose iLO 2 using HP SIM through a web browser and SNMP alerting.

For more information about iLO 2, see the iLO 2 documentation on the HP web page:

http://h18004.www1.hp.com/products/servers/management/iloadv2/index.html.

182 Server Blades