HP Cluster Platform Server and Workstation Overview

Search for the SAN product required, and navigate to technical documentation.
• The HP BladeSystem c-Class storage web page:
http://www.hp.com/go/bladesystem/storage
4.13.8 Removing the HP ProLiant BL685c from the c-Class Enclosure
The procedure to remove the HP ProLiant BL685c server blade from the c–Class enclosure is the
same as described previously in Section 4.10.8.
4.14 HP ProLiant BL685c G5 Server Blade Overview
The HP BladeSystem c–Class enclosure supports up to eight full-height HP ProLiant BL685c G5
server blades.
For the features and specifications of the HP ProLiant BL685c G5, see the QuickSpecs on the HP
website:
http://h18004.www1.hp.com/products/quickspecs/13022_na/13022_na.pdf
Figure 4-39 shows the front view of a ProLiant BL685c G5 server blade.
Figure 4-39 HP ProLiant BL685c G5 Front View
1
62 543 8
7 9
10 11 12
The following list describes the callouts shown in Figure 4-39:
1. UID LED Serial label pull tab
2. Health LED
3. NIC 1 LED
4. NIC 2 LED
5. NIC 3 LED
6. NIC 4 LED
7. Power On/Standby button and system power LED
8. Local I/O connector
9. Hard drive bay 2
10. Hard drive bay 1
11. Release button
12. Server blade handle
For an internal view of the HP ProLiant BL685c G5 and additional information, such as the system
board layout and how to install mezzanine HCA cards, see the HP ProLiant BL685c Generation 5
Server Maintenance and Service Guide:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00805082/c00805082.pdf
4.15 HP Integrity BL860c Server Blade Overview
The HP Integrity BL860c server blade is a two-socket full-height server blade featuring three
models of the latest Intel Itanium 2 dual-core processors supported by up to 48 GB memory (12
202 Server Blades