HP Cluster Platform Server and Workstation Overview

Figure 4-42 HP Integrity BL860c Internal View
The following list describes the callouts in Figure 4-42:
1. SAS backplane
2. Memory DIMMs
3. Mezzanine card 1
4. Mezzanine card 2
5. Mezzanine card 3
6. Processors
7. System board
8. Trusted platform module
9. Front panel
10. SAS disk drives
4.15.4 Configuring or Replacing Memory
When installing additional memory in the HP Integrity BL860c server blade, observe the following
guidelines:
1. All DIMMs must be PC2-4200 DIMMs (DDR2 533 MHz).
2. Both DIMM slots in a memory bank must be populated.
3. Banks must be populated in sequential numeric order, starting with bank 0.
4. Both DIMMs in a memory bank must be identical. Install identical DIMMs in pairs, starting
with DIMM socket A, bank 0.
206 Server Blades