HP Cluster Platform Server and Workstation Overview

5. Double Chip Spare requires that DIMMs are loaded in like quads.

6. DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the

smallest numbered DIMM slot.

For the latest memory configuration information or for replacing memory information, see the

HP Integrity BL860c Server Blade QuickSpecs at:

http://h18004.www1.hp.com/products/servers/integrity-bl/c-class/860c/index.html.

4.15.5 Mezzanine HCA Card

In HP Cluster Platform, the HP Integrity BL860c server blades are pre-configured with the

appropriate mezzanine card for the configuration type selected. For more information on the

mezzanine HCA card, see the HP Integrity BL860c Server Blade QuickSpecs at:

http://h18004.www1.hp.com/products/servers/integrity-bl/c-class/860c/index.html.

4.15.6 Supported Storage

The HP Integrity BL860c supports up to two optional hot-pluggable serial attach SCSI (SAS)

drives for a maximum of 292 GB (2 x 146 GB serial SCSI) internal storage.

The physical aspect of inserting and removing a disk drive is discussed in the document that

comes with the drive.

For more detailed SAN configuration information for the server blade, see the following

documents:

• The model-specific QuickSpecs document located on the HP c-Class server blade products

web page: http://h18004.www1.hp.com/products/blades/components/

c-class-bladeservers.html

• The HP StorageWorks SAN documentation:

http://h18006.www1.hp.com/storage/index.html

Search for the SAN product required, and navigate to technical documentation.

• The HP BladeSystem c-Class storage web page:

http://h18004.www1.hp.com/products/blades/components/c-class-storage.html

4.15.7 Removing the HP Integrity BL860c from the c-Class Enclosure

The procedure to remove the HP Integrity BL860c server blade from the c–Class enclosure is the

same as described previously in Section 4.10.8.

4.15 HP Integrity BL860c Server Blade Overview 207