HP Cluster Platform Server and Workstation Overview

Figure 5-4 PCI Levers
HPTC-0211
Figure 5-5 PCI Express Levers
HPTC-0215
8. Lift the PCI card out of the chassis and store it in an antistatic bag.
Installing a New PCI Card
To install a new PCI or PCI Express card from an HP xw8200 workstation, follow these steps:
1. Disconnect the power cord from the AC outlet, then from the workstation.
2. Disconnect all peripheral device cables from the workstation.
3. Remove the access panel as follows:
a. If necessary, unlock the access panel.
b. Pull up on the handle and lift off the cover.
4. Lay the workstation on its side with the system board facing up.
5. Remove the PCI retainer, as shown in Figure 5-3.
6. Lift the PCI levers by first pressing down on them and then out, as shown by callout 1 in
Figure 5-6.
212 Workstations