HP Cluster Platform Server and Workstation Overview

Figure 1-15 HP Integrity rx2620 Rear Panel
SCSI LVD/SE
Management Card
LAN Gb A
VGA
PWR
1
2
PWR
LAN Gb B
LAN 10/100
SERIAL A
SERIAL B
CONSOLE
MP
RESET
Automatic Internal SCSI Termination
WARNING Unplug all power cords from system before servicing
TOC
CONSOLE / REMOTE / UPS
USB
1
2 3 4
6 7 8
9
10
11
12
13
5
The following table describes the callouts in Figure 1-15.
DescriptionItem
AC power receptacles (AC2 on the left and AC1 on the right)1
LVD/SE SCSI2
10/100 management LAN3
LAN Gb A (10/100/1000 LAN)4
VGA port5
LAN Gb B (10/100/1000 LAN)6
Locator button/LED7
ToC button8
Console/Remote/UPS9
USB ports10
Console/Serial Port A11
Serial port B12
PCI slots (1 through 4, beginning at the top)13
Table 1-6 provides a quick reference to these connections.
Table 1-6 Quick Reference for HP Integrity rx2620 Connections
ConnectionDescriptionLabel
Console ProCurve Switch, CES1.Management LANLAN 10/100
Administrative ProCurve Switch, AES1.Gigabit Ethernet LANLAN Gb A
Optionally connect to KVM, if this is a control node.Video OutVGA
Optionally connect to KVM USB mouse and keyboard, if this is
a control node. (Do not use the USB ports that are labeled with
a mouse and keyboard icon.)
Upper port of the two stacked
USB ports
USB
Install an HBA or HCA adapter for the appropriate interconnect.Top of the four full-length
64-bit/133MHz PCI-X slot
PCI slot 1
1.3.1 PCI Slot Assignments
The HP Integrity rx2620 has four PCI slots. Table 1-7 summarizes the slot assignments and the
PCI cards.
38 Itanium Processor Servers