HP Cluster Platform Server and Workstation Overview

Figure 1-24 Removing the Server's Top Panel
1
3. If you are inserting a card, remove the bulkhead screw that attaches the blank plate to the
server chassis. Retain both the screw and the plate.
4. Insert the PCI adapter into slot 8, which is closest to the side of the server’s case and furthest
from the power inlet. Ensure that the card is level, as shown in Figure 1-25.
Figure 1-25 Installing the PCI Card
Secure the card using the bulkhead screw.
5. If you remove a card, ensure that you replace the blank plate to maintain the correct airflow
for optimum cooling.
1.5 HP Integrity rx3600 49