HP Cluster Platform Server and Workstation Overview

Figure 1-28 Removing the Screws that Secure the Server in the Rack
1
2. Remove the server’s top rear cover to access the PCI slots by unscrewing the thumbscrews
at the rear of the server (see callout 1 in Figure 1-29).
Figure 1-29 Removing the Server's Top Panel
1
3. If you are inserting a card, remove the bulkhead screw that attaches the blank plate to the
server chassis. Retain both the screw and the plate.
4. Insert the PCI adapter into slot 8, which is closest to the side of the server’s case and furthest
from the power inlet. Ensure that the card is level, as shown in Figure 1-30.
1.6 HP Integrity rx4640 53