HP Cluster Platform Server and Workstation Overview

Table 2-3 HP ProLiant DL140 G2 Rear Panel Features (continued)

DescriptionItem

Serial port (teal)9

Standard height, full-length 64-bit/133 MHz PCI-X riser board slot cover. You can convert the PCI-X

functionality of this slot to PCI Express using the PCI Express riser board option kit.

PS/2 keyboard port (purple)11

PS/2 mouse port (green)12

10/100 MB/s LAN port for IPMI management (RJ-45)13

IEC power inlet14

2.1.1 HP ProLiant DL140 G2 PCI Slot Assignments

The ProLiant DL140 G2 has two PCI–Express slots on the rear of the chassis. Table 2-4 summarizes

the slot assignments.

Table 2-4 HP ProLiant DL140 G2 PCI Slot Assignments

AssignmentSlot

PCI-X interconnect1

64-bit 133 MHz PCI-X2

2.1.2 HP ProLiant DL140 G2 Memory Configurations

The HP ProLiant DL140 G2 has eight DIMM slots that support up to 16 GB maximum system

memory (2 GB in each of the eight DIMM slots). Observe the following rules when installing

memory modules:

• Use only HP supported PC2-3200 (400 MHz) registered ECC DIMMs in 512 MB, 1 GB, or 2

GB capacities.

• Install memory modules in pairs of the same size.

• Install memory modules in progressively larger capacity, following the slot sequence listed

in Table 2-5.

Table 2-5 HP ProLiant DL140 G2 Memory Module Sequence

CapacitySlot

Smallest capacity modules, such as 512 MB.DIMMA1 and DIMMB

Next largest capacity modulesDIMMA2 and DIMMB2

Next largest capacity modulesDIMMA3 and DIMMB3

Largest capacity modules, such as 2 GBDIMMA4 and DIMMB4

2.1.3 Installing a PCI Card in the HP ProLiant DL140 G2

There are two PCI expansion slots on the system board, as shown by callouts 6 and 10 in Figure 2-2.

Table 2-6 HP ProLiant DL140 G2 PCI Slots

CapabilitiesSlot

Supports a low profile 64-bit, 133 MHz PCI-X riser board64-bit 133 MHz PCI-X slot (left)

Supports a standard height, full-length 64-bit 133 MHz PCI-X riser board64-bit 133 MHz PCI-X slot (right)

To install a standard height interconnect host bus adapter (HBA) or host channel adapter (HCA)

in PCI slot 1 (right side), follow these steps:

2.1 HP ProLiant DL140 G2 57