HP Cluster Platform Server and Workstation Overview

Figure 2-5 Installing an Interconnect Adapter in the HP ProLiant DL140 G2 PCI Card Cage
6. Reinstall the PCI riser board assembly as follows:
a. Align the assembly with the system board expansion slots, then press it down to ensure
full connection to the system board.
b. Tighten the two captive thumbscrews to secure the assembly to the chassis.
7. Replace the server lid by reversing the procedure described in Step 1.
For more information, see the following documents:
• HP ProLiant DL140 Generation 2 Server Installation Sheet
• HP ProLiant DL140 Generation 2 Server Maintenance and Service Guide
2.2 HP ProLiant DL140 G3 Used in HP Cluster Platform and Scalable
Visualization Array
The HP ProLiant DL140 G3 server is a 1U, dual-processor capable server supporting Intel Xeon
dual-core processors to 3.0 GHz/1333 MHz with 4 MB (1 x 4MB) Level 2 cache (5100 series), or
4 MB (2 x 2MB) Level 2 cache (5000 series). It provides 8 DIMM slots, enabling a maximum 16
GB of PC2-5300 DDR2–667 memory. A standard full-height, full-length PCI express slot and an
additional low-profile, half-length PCI slot are provided for adapters.
The DL140 G3 supports non hot-pluggable serial ATA (SATA) and SCSI 3.5-inch hard disk drives.
The DL140 G3 also supports up to two hot-pluggable Serial ATA (SATA) or Serial Attached SCSI
(SAS) 3.5 inch hard drives and is used as a compute node in HP Cluster Platform configurations.
It is also used as a compute node or as a render node in HP Cluster Platform Scalable Visualization
Array (SVA) configurations.
Table 2-7 lists the features of the HP ProLiant DL140 G3.
Table 2-7 HP ProLiant DL140 G3 Features
SpecificationFeature
Dual-Core Intel® Xeon® Processor 5160, 3.00 GHz, 1333 MHz Front
Side Bus (FSB)
Up to two (2) dual-core processors per
chassis
Dual-Core Intel Xeon Processor 5150, 2.66 GHz, 1333 MHz FSB
Dual-Core Intel Xeon Processor 5140, 2.33 GHz, 1333 MHz FSB
Dual-Core Intel Xeon Processor 5130, 2.0 GHz, 1333 MHz FSB
Dual-Core Intel Xeon Processor 5110, 1.60 GHz, 1066 MHz FSB
Dual-Core Intel Xeon Processor 5080, 3.73 GHz, 1066 MHz FSB
Dual-Core Intel Xeon Processor 5060, 3.20 GHz, 1066 MHz FSB
Dual-Core Intel Xeon Processor 5050, 3.00 GHz, 667 MHz FSB
2.2 HP ProLiant DL140 G3 Used in HP Cluster Platform and Scalable Visualization Array 59