HP Cluster Platform Server and Workstation Overview

Table 2-7 HP ProLiant DL140 G3 Features (continued)
SpecificationFeature
5100 series: 4 MB (1x4 MB L2 cache)Cache
5000 series: 4 MB (2x2 MB L2 cache)
PC2-5300 Fully Buffered DIMMs (DDR2-667) with Advanced ECCMemory type
16 GBMaximum memory
Non hot-pluggable Serial ATAStorage (Maximum two 3.5” hard drives of
one type)
Non hot-pluggable SCSI
Hot-pluggable Serial ATA (SATA)
Serial Attached SCSI (SAS)
1 removable media bay
Non hot-pluggable models: HP embedded SATA RAID controller (non
hot-pluggable SATA models)
Storage Controller
Hot-pluggable models: HP 8 internal port SAS HBA with RAID 0, 1, 10
(hot-pluggable SATA/SAS models)
Dual integrated 10/100/1000 Broadcom 5721 (Wake on LAN and PXE
capable)
Network (2 ports)
HP ProLiant Lights Out 100iRemote management
Figure 2-6 identifies the front panel features of the HP ProLiant DL140 G3 with hot-pluggable
drives. The rear panel features of the DL140 G3 are the same as the DL140 G2 as shown in
Figure 2-2.
Figure 2-6 HP ProLiant DL140 G3 Front Panel
5
1
2 4 63
7 9
8
The following table describes the callouts in Figure 2-6.
Table 2-8 HP ProLiant DL140 G3 Front Panel Features
DescriptionItem
Hard disk drive (HDD) bays with hot-pluggable drives shown (otherwise, the front panel is the
same as the DL140 G2)
1
Optical media device bay2
Unit identification (UID) button with LED indicator (blue)3
System health LED indicator (amber)4
Activity/link status LED indicators for NIC 1 and NIC 2 (green)5
HDD activity LED indicator (green)6
USB 2.0 ports7
60 Xeon Processor Servers