HP Cluster Platform Server and Workstation Overview

Table 2-12 HP ProLiant DL140 G3 Memory Module Sequence (continued)

CapacitySlot

Next largest capacity modulesDIMMA3 and DIMMB3

Largest capacity modules, such as 2 GBDIMMA4 and DIMMB4

2.2.3 Installing a PCI Card in the DL140 G3

Installation of PCI cards in the DL140 G3 PCI riser board is the same as the DL140 G2 described

previously in Section 2.1.3. The HP ProLiant DL140 Generation 3 Server supports up to two

optional PCI-X riser boards. For more information on HP ProLiant DL140 G3, see the ProLiant

100 Series Servers User Guide.

2.3 HP ProLiant DL160 G5 and G5p

The HP ProLiant DL160 G5 uses 5400-series Intel Xeon processors and chipsets, with four disk

drive bays in a 1U form factor. The DL160 G5 has two x16 PCI Express 2.0 slots, four 3.5-inch

drives with 3 terabytes (TB) of storage capacity. The DL160 G5 also has a 1600MHz front-side

bus. The DL160 G5 and G5p can be used as a control node, a utility node, and a compute node

in HP Cluster Platform configurations.

For the features and specifications of the HP ProLiant DL160 G5, go to:

http://h18004.www1.hp.com/products/quickspecs/12902_na/12902_na.html

For the features and specifications of the HP ProLiant DL160 G5p, go to:

http://h18004.www1.hp.com/products/quickspecs/13138_na/13138_na.html

Figure 2-7 shows the front view of the ProLiant DL160 G5 and G5p.

Figure 2-7 HP ProLiant DL160 G5 and G5p Front View

2 43 5 6 7 8

10 9

The following list describes the callouts shown in Figure 2-7:

1. Thumbscrews for rack mounting (quantity 2)

2. Optical disk drive bay

3. Serial number pull tab

4. Two front USB 2.0 ports

5. Unit identification (UID) LED button

6. System health LED

7. NIC1 LED

8. NIC2 LED

9. Power button with LED indicator (bicolor: green and amber)

10. Hard disk drive (HDD) LED

11. HDD bays 1, 2, 3, and 4

62 Xeon Processor Servers