HP Cluster Platform Server and Workstation Overview
Table 2-13 ProLiant DL360 G3, G4 and G4p Model Comparison
HP ProLiant DL360 G4 and G4pHP ProLiant DL360 G3Feature
Intel Xeon processor 3.4, 3.4, and 3.6 GHz
Xeon, 800MHz front side bus and EM64T(2P)
2.4+GHz Xeon, 533MHz Front Side Bus (2P)Processor
1Mb L2 (2Mb L2 advanced transfer cache In
the G4p)
512K L2, 1 MB L3, Or 2 MB L3Processor cache
800 MHz533MHzFSB
Embedded Smart Array 6I, optional 128 MB
BBWC (SCSI Models)
Embedded Smart Array 5I+, With 64 MB
Memory, Optional Bbwc
Drive controller
Dual port NC7782 Gigabit NIC2 Embedded Nc7781 Gigabit NICsNIC
pc2700 333MHz DDR, can be configured for
2:1 or 4:1 interleaving, with online spare
pc2100,266MHz DDR, 2:1 interleavedMemory
memory and advanced ECC (400MHz DDR2
in the G4p
2 - 1.0" (U320 SCSI disk drive models; SATA
disk drive models)
2 - 1.0" (U320 drives only)Drive bays
Embedded iLOEmbedded iLOManagement
1 full length and 1 half length PCI-X slots;
optional PCI Express slots
1 or 2 PCI-X Slots (1 with redundant power
installed, 2 without)
i/O slots
8Gb ECC SDRAM (12 GB in the G4p)8Gb ECC SDRAMMaximum memory
Optional HP redundantOptional HP redundantPower supply
Redundant (standard)Non-HP, non redundantFan
1U; sliding rails standard, optional cable
management arm
1U; fixed rails standard, optional sliding railsChassis
460W325WPower
There are three embedded network ports on an HP ProLiant DL360. The iLO port connects to
the console network switch and is used for server management. The NIC 1 port is used for the
administrative network, and the NIC 2 port is used for the system interconnect. See Figure 2-10
and Figure 2-12 to locate the ports.
Fan redundancy is standard in the HP ProLiant DL360 G4 model and is optional in the G3 model.
It allows for continued operation until maintenance can be scheduled to replace a failed fan
assembly. Similarly, optional hot-pluggable power supply redundancy means no down time to
repair failure because each power supply has its own power cord. Hard disk drives for the HP
ProLiant DL360 are optional. If used, each disk drive must be the same size and speed.
Figure 2-9 and Figure 2-10 describe the front and rear panels of the ProLiant DL360 G3.
64 Xeon Processor Servers