HP Cluster Platform Site Preparation Guide

that are attached with straps of fabric; be careful that the pieces do not swing out and hurt
you or anybody else.
3. Extend the ramps to their full length, if necessary, as shown in Figure 2-2.
Figure 2-2 Ramp Extension and Installation
Left
unloading
ramp
Right
unloading
ramp
Right ramp
attaches here
Shipping
pallet
Extend ramp to
full length
ZK-2084
4. Attach the ramps by fitting the metal prongs into the holes on the pallet. Line up the arrows
on the ramps with the arrows on the pallet, as shown in Figure 2-2. If necessary, use a hammer
or mallet to ensure a firm connection.
5. Remove the shipping bolts and brackets (see Figure 2-3) that hold the rack on the pallet.
40 Unpacking and Assembling the Racks