Broadcom iSCSI Boot for HP FlexFabric Adapters User Guide

Event notifications 34
Message
Number
Severity Message
22
Error
Header digest error was detected for the given PDU. Dump data contains the
header and digest.
23
Error Target sent an invalid iSCSI PDU. Dump data contains the entire iSCSI header.
24
Error
Target sent an iSCSI PDU with an invalid opcode. Dump data contains the entire
iSCSI header.
25
Error Data digest error was detected. Dump data contains the calculated checksum
followed by the given checksum.
26
Error Target trying to send more data than requested by the initiator.
27
Error Initiator could not find a match for the initiator task tag in the received PDU.
Dump data contains the entire iSCSI header.
28
Error Initiator received an invalid R2T packet. Dump data contains the entire iSCSI
header.
29
Error Target rejected an iSCSI PDU sent by the initiator. Dump data contains the
rejected PDU.
30
Error Initiator could not allocate a work item for processing a request.
31
Error Initiator could not allocate resource for processing a request.
32
Information Initiator received an asynchronous logout message. The target name is given in
the dump data.
33
Error Challenge size given by the target exceeds the maximum specified in iSCSI
specification.
34
Information A connection to the target was lost, but the initiator successfully reconnected to
the target. Dump data contains the target name.
35
Error Target CHAP secret is smaller than the minimum size (12 bytes) required by the
specification.
36
Error Initiator CHAP secret is smaller than the minimum size (12 bytes) required by the
specification. Dump data contains the given CHAP secret.
37
Error FIPS service could not be initialized. Persistent logins are not processed.
38
Error Initiator requires CHAP for login authentication, but target did not offer CHAP.
39
Error Initiator sent a task management command to reset the target. The target name
is given in the dump data.
40
Error Target requires login authentication via CHAP, but the initiator is not configured
to perform CHAP.
41
Error Target did not send AuthMethod key during security negotiation phase.
42
Error Target sent an invalid status sequence number for a connection. Dump data
contains the Expected Status Sequence number followed by the given status
sequence number.
43
Error Target failed to respond in time for a login request.
44
Error Target failed to respond in time for a logout request.
45
Error Target failed to respond in time for a login request. This login request was for
adding a new connection to a session.
46
Error Target failed to respond in time for a SendTargets command.
47
Error Target failed to respond in time for a SCSI command sent through a WMI
request.
48
Error Target failed to respond in time to a NOP request.
49
Error Target failed to respond in time to a Task Management request.
50
Error Target failed to respond in time to a Text Command sent to renegotiate iSCSI
parameters.