Broadcom Comprehensive Configuration Management for HP FlexFabric Adapters User Guide

Scripting mode 32
Boot Strap Type = Auto
Hide Setup Prompt = Disabled
Setup Key Stroke = Ctrl-S
Banner Message Timeout = 5 Seconds
Link Speed = 10Gbps
Pre-boot Wake On LAN = Disabled
VLAN Mode = Disabled
VLAN ID = 1
Boot Retry Count = 0
…
-set operation
The following example checks the difference of outdata.txt with current devices on the platform.
C:\test\7.8.21>ccmcfg32 -set outdata.txt -setMode check
Set 00:10:18:6F:D2:74 by outdata.txt...Nothing to Save; 0 Err, 0 Wrn, 0 Dif
Set 00:10:18:6F:D2:76 by outdata.txt...Nothing to Save; 0 Err, 0 Wrn, 0 Dif
Set 00:10:18:C7:5F:60 by outdata.txt...Nothing to Save; 0 Err, 0 Wrn, 0 Dif
Set 00:10:18:C7:5F:62 by outdata.txt...Nothing to Save; 0 Err, 0 Wrn, 0 Dif
Set 00:00:00:00:00:00 by outdata.txt...NOT Saved; 0 Err, 0 Wrn, 6 Dif
Set B8:AC:6F:93:86:BA by outdata.txt...NOT Saved; 0 Err, 0 Wrn, 0 Dif
Set 00:10:18:57:20:00 by outdata.txt...NOT Saved; 0 Err, 0 Wrn, 0 Dif
Set 00:10:18:57:20:01 by outdata.txt...NOT Saved; 0 Err, 0 Wrn, 0 Dif
CONGRATULATIONS: Script File Check Passed
The following example checks the difference between cfg.cfg and current devices and outputs the log files
to STDERR. The first three devices contain no configuration difference from the file, while the fourth device
contains one difference. This is because the cfg.cfg is dumped from the -get operation with a hidden
CHAP secret string of ************ that does not match the actual string in the device.
E:\ccm2>ccmcfg32 -set cfg.cfg -setMode check -stderr
Press any key to continue... or Attach Debugger Now:
Set 00:24:81:00:60:20 by cfg.cfg..
;***********************************************************************
; NO Difference Detected
;***********************************************************************
NOT Saved; 0 Err, 0 Wrn, 0 Dif
Set 00:24:81:00:60:21 by cfg.cfg..
;***********************************************************************
; NO Difference Detected
;***********************************************************************
NOT Saved; 0 Err, 0 Wrn, 0 Dif
Set 00:10:18:3E:01:24 by cfg.cfg..
;***********************************************************************
; NO Difference Detected
;***********************************************************************
NOT Saved; 0 Err, 0 Wrn, 0 Dif
Set 00:10:18:3E:01:26 by cfg.cfg..
;***********************************************************************
;CCMCFG32 v2.0.9 - Comprehensive Configuration Utility
;Copyright (C) 2000-2010 Broadcom Corporation
; Configuration Difference between File cfg.cfg and <00:10:18:3E:01:26>
;***********************************************************************
[Device Parameters]
MAC Address = 00:10:18:3E:01:26
PCI Function Number = 0A:00:01
Device Type = BCM57712Vendor ID = 0x14E4
Device ID = 0x1662
Subsystem Vendor ID = 0x14E4