Broadcom Comprehensive Configuration Management for HP FlexFabric Adapters User Guide

Scripting mode 35

;Configure Initiator IP address:

IP Address = < xxx::xxx:xxx.xxx.xxx.xxx IPv6 address> ; Current =

;Configure IP Subnet Mask Prefix Length:

Subnet Mask Prefix = <Integer (0 to 128)> ; current = 64

;Configure Default Gateway IP Address:

Default Gateway = < xxx::xxx:xxx.xxx.xxx.xxx IPv6 address> ; Current =

;Configure Primary DNS IP Address:

Primary DNS = < xxx::xxx:xxx.xxx.xxx.xxx IPv6 address> ; Current =

;Configure Secondary DNS IP Address:

Secondary DNS = < xxx::xxx:xxx.xxx.xxx.xxx IPv6 address> ; Current =

;Configure iSCSI Name:

iSCSI Name = < String (0 to 128 Chars) > ; current = iqn.1995-

05.com.bro

adcom.iscsiboot

;Configure CHAP ID:

CHAP ID = < String (0 to 128 Chars) > ; current =

;Configure CHAP Secret:

CHAP Secret = < String (12 to 16 Chars) > ; current =

[1st Target Parameters]

;Enable/Disable Target Establishment:

Connect = < Enabled | Disabled > ; Current = Disabled

;Configure Target IP Address:

IP Address = < xxx::xxx:xxx.xxx.xxx.xxx IPv6 address> ; Current = ::

;Configure Target TCP Port Number:

TCP Port = <Integer (1 to 65535)> ; current = 3260

;Configure Target Boot LUN Number:

Boot LUN = <Integer (0 to 255)> ; current = 0