start démarrage inbetriebnahme avvio inicio startgids aloitus innføring início inledning lea esto primero hp color LaserJet 9500n hp color LaserJet 9500hdn
GSG-C8546-90960-XLWW.fm Page 1 Wednesday, April 30, 2003 5:09 PM Copyright and License © Copyright Hewlett-Packard Company 2003 All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained in this document is subject to change without notice. Part number: C8546-90960 Edition 2, 4/2003 Trademark Credits Windows® is a U.S. registered trademark of Microsoft Corporation.
GSG-C8546-90960-XLWW.fm Page 2 Wednesday, April 30, 2003 5:09 PM 1 2 1 Rimuovere la stampante dall'imballaggio. Avvertenza: la stampante è pesante. Per scaricare la stampante dal pallet sono necessarie due persone. Per informazioni sulla rimozione della stampante dall'imballaggio, fare riferimento alle illustrazioni riportate nella parte superiore della scatola. Rimuovere il materiale di imballaggio.
GSG-C8546-90960-XLWW.fm Page 3 Wednesday, April 30, 2003 5:09 PM 3 1 hp color LaserJet 9500hdn 2 3 4 5 6 Check the contents of the box. The box contains: 1) the printer 2) the user guide (to be placed in the pocket inside the front door) 3) the software CD-ROM, which includes the user reference guide 4) this start guide and other documentation 5) the HP Paper Sample Guide 6) the control-panel overlay (Parts 5 and 6 might be already installed.
GSG-C8546-90960-XLWW.fm Page 4 Wednesday, April 30, 2003 5:09 PM 7 8 4 8 9 355 mm (14.0 inches) 465 mm 682 mm (26.9 inches) (18.3 inches) 455 mm 767 mm (30.2 inches) (17.9 inches) 10 11 hp color LaserJet 9500n 12 887 mm (34.9 inches) 7) four print cartridges — yellow (Y), magenta (M), cyan (C), and black (K) 8) four image drums — yellow (Y), magenta (M), cyan (C), and black (K) 9) the toner collection bottle 10) the image transfer cleaner 11) the power cord 12) the left bin.
GSG-C8546-90960-XLWW.fm Page 5 Wednesday, April 30, 2003 5:09 PM 355 mm (14.0 inches) 465 mm (18.3 inches) 455 mm 767 mm (30.2 inches) (17.9 inches) hp color LaserJet 9500hdn 682 mm (26.9 inches) 1212 mm (47.8 inches) Regulate the environment. Place the printer in a well-ventilated area that does not expose the printer to chemicals, including ammonia, or direct sunlight.
GSG-C8546-90960-XLWW.fm Page 6 Wednesday, April 30, 2003 5:09 PM 5 Make sure that the location has an adequate power source. Determine the correct voltage for your printer by checking the voltage rating (shown on a label on the back of the printer). The printer requires either a 15-amp, 100- to 127-volt circuit or a 10-amp, 220- to 240-volt circuit. Install the left bin. 1) Remove the left bin from its packaging. 2) Insert the left bin in the slot on the left side of the printer.
GSG-C8546-90960-XLWW.fm Page 7 Wednesday, April 30, 2003 5:09 PM 8 1 6 2 9 3 4 10 5 6 12 13 7 14 16 11 15 Back view: 10) three enhanced input/ouput (EIO) slots 11) the HP Jetdirect print server RJ-45 connector 12) the HP Jet-Link connector 13) the foreign interface harness (FIH) 14) the HP Fast InfraRed (FIR) connector 15) the parallel cable connector (IEEE-1284c) 16) the accessory power connector 17) the power cord connector Français Identifiez les pièces de l'imprimante.
GSG-C8546-90960-XLWW.fm Page 8 Wednesday, April 30, 2003 5:09 PM 7 8 1 2 3 Install the HP Paper Sample Guide (optional). 1) Remove the paper sample guide from its packaging. 2) Open the left-front door of the printer. 3) Slide the back cover of the paper sample guide into the slot indicated on the door. Note: This guide might already be installed on your printer. Install accessories.
GSG-C8546-90960-XLWW.fm Page 9 Wednesday, April 30, 2003 5:09 PM 3) Remove the yellow cartridge from its packaging. Note: If toner gets on your clothes or your hands, wash them with cold water. 3) Déballez la cartouche jaune. Remarque : Si vous tachez vos vêtements ou vos mains d'encre, lavez-les à l'eau froide. Français Installez les quatre cartouches d'impression. Remarque : Avant de commencer, il est conseillé de retirer vos bijoux afin de ne pas les coincer dans un élément interne de l'imprimante.
GSG-C8546-90960-XLWW.fm Page 10 Wednesday, April 30, 2003 5:09 PM 4) Align the arrow label on the top of the cartridge with the arrow label above the empty slot. Slide the cartridge into the printer until it clicks. Note: If the cartridge does not fit, make sure that you are installing the correct color cartridge in the correct slot. 5) Turn the blue lever to the left until it clicks into place. 6) Repeat this process to install the other three print cartridges.
GSG-C8546-90960-XLWW.fm Page 11 Wednesday, April 30, 2003 5:09 PM 10 3 2 3) Using the blue handle, firmly insert the transfer cleaner into the printer until it clicks to a stop. 4) Rotate the blue transfer cleaner handle up and firmly push it to the right until it snaps into place. Note: If the handle does not snap into place, make sure that the transfer cleaner is pushed all the way in. Français Installez le kit de nettoyage du système de transfert d'image.
GSG-C8546-90960-XLWW.fm Page 12 Wednesday, April 30, 2003 5:09 PM 12 11 2 Install the toner collection bottle. 1) Remove the toner collection bottle from its packaging. 2) Slide the toner collection bottle down and snap it into place against the printer. Note: If the bottle does not snap into place, make sure the blue transfer cleaner handle and the green lever are in the upright position. Install the four image drums. 1) Swing the large, green lever down.
GSG-C8546-90960-XLWW.fm Page 13 Wednesday, April 30, 2003 5:09 PM 3) Remove the yellow image drum from its packaging. Note: Do not remove the protective cover on the underside of the drum unit until step 6. Do not touch the green component inside the drum cartridge. If toner gets on your clothes or your hands, wash them with cold water. 2) Faites pivoter la molette bleue vers le haut jusqu'à ce que vous entendiez un déclic et que la porte d'accès aux tambours d'images soit déverrouillée.
GSG-C8546-90960-XLWW.fm Page 14 Wednesday, April 30, 2003 5:09 PM 4) Place the drum on a level surface. Pull the orange ring on the end of the drum all the way out to remove the seal from inside the drum. Pull the orange handle on the top of the drum to remove the protective sheet, the silica gel pack, and the orange tape and discard them. Pull the two orange rings on the side of the drum. Note: Do not shake the drum.
English 7) Repeat this process to install the remaining three image drums. Close the image-drum door, pressing the tabs at the top of the door until they click into place. Français 6) D'une main, maintenez en place le couvercle protecteur gris. De l'autre, insérez à fond le tambour dans l'imprimante. Remarque : Si vous ne parvenez pas à insérer le tambour, vérifiez qu'il s'agit de celui correspondant au logement et que vous avez aligné le tambour correctement.
GSG-C8546-90960-XLWW.fm Page 16 Wednesday, April 30, 2003 5:09 PM 13 8 9 8) Rotate the blue dial downward until it stops. 9) Swing the large, green lever up. 10) Close the front doors. Load media in trays 2 and 3. 1) Pull the tray open until it stops. 2) Load the media so that the side to be printed faces down, and the top edge is toward the rear of the tray. Do not load more media than the maximum that is indicated by the media-fill triangles at the back of the tray.
GSG-C8546-90960-XLWW.fm Page 17 Wednesday, April 30, 2003 5:09 PM 3 5 3) Move the left media guide to match the media size that is being loaded. 4) Move the front media guide to match the media size that is being loaded. 5) Set the custom/standard switch to STANDARD. Note: See the user reference guide on the CD-ROM for information about loading custom-sized media and configuring input trays. 6) Slide the tray back into the printer.
GSG-C8546-90960-XLWW.fm Page 18 Wednesday, April 30, 2003 5:09 PM 14 15 1 2 3 4 5 6 1 2 Change the control-panel overlay (optional). If necessary, replace the installed overlay with the one that is included in the printer box. 1) Insert a small, pointed object into the notch above the overlay, and then lift up. 2) Align the new overlay with the holes on the control panel, rotate the overlay into position, and then snap it into place. Understand the control panel.
GSG-C8546-90960-XLWW.fm Page 19 Wednesday, April 30, 2003 5:09 PM 1 2 3 7 Suomi Português Español Italiano Deutsch Français English 8 9 10 11 12 13 7) CANCEL JOB button, 8) green Ready light 9) green Data light 10) amber Attention light 11) HELP button 12) DOWN button 13) CLEAR button. See the user guide (in the front-door pocket) for more information about the control panel. Understand the supplies status indicators.
GSG-C8546-90960-XLWW.fm Page 20 Wednesday, April 30, 2003 5:09 PM 16 1 2 Connect the power cable and turn on the printer. 1) Plug the power cable into the power connector on the left side of the printer, and then plug the other end of the power cable into an ac outlet. 2) Press the power switch on the front of the printer to turn the printer on. Note: The printer makes a noticeable pop sound when it turns on. This sound is normal. Change the control panel language (optional).
When the printer reaches the Ready state, the green Ready light turns on, the READY message appears on the control-panel graphical display, and the supplies status indicators show that all supplies are new. Note: The READY message might alternate with other messages. If the printer does not reach the Ready state, see the user reference guide on the CD-ROM. Français L'imprimante poursuit son démarrage. Remarque : Suivez ces instructions lors de la première mise sous tension de l'imprimante.
GSG-C8546-90960-XLWW.fm Page 22 Wednesday, April 30, 2003 5:09 PM 17 Note: If the page does not print, check the control panel for error messages and follow the instructions on the graphical display to clear any errors. Press (HELP button) to get additional help or see the user reference guide on the CD-ROM for troubleshooting information. Print a demo page to verify that the printer is working. 1) Press (SELECT) to enter the menus.
GSG-C8546-90960-XLWW.fm Page 23 Wednesday, April 30, 2003 5:09 PM 19 18 1 Install the printing software. Procedures for software installation vary according to the operating system and the network environment. Insert the CD-ROM into the CD-ROM drive. When the installation wizard starts, follow the instructions. See the user reference guide on the CD-ROM if the installation wizard does not start or for detailed installation information. Connectez le câble d'interface de l'imprimante.
GSG-C8546-90960-XLWW.fm Page 24 Wednesday, April 30, 2003 5:09 PM 20 Test the software installation. Print a test page from the printer driver to test the software installation. On computers running Windows®, follow these instructions to gain access to the printer driver. 1) From your computer desktop, click Start. 2) Select Settings, and then click Printers (In Windows XP, click Printers and Faxes). 3) Right-click the HP color LaserJet 9500 series printer icon, and then click Properties.
GSG-C8546-90960-XLWW.fm Page 25 Wednesday, April 30, 2003 5:09 PM Congratulations! Your printer is ready to use. See the user reference guide on the CD-ROM for instructions for configuring the printer and any accessories you might have purchased and for more information about the functions available in the HP color LaserJet 9500 series printer.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.fm Page 29 Wednesday, April 30, 2003 5:09 PM 1 2 1 Svenska Norsk Nederlands 2 De printer uit de verpakking verwijderen. Waarschuwing! De printer is zwaar. Er zijn twee personen nodig om de printer veilig van de pallet af te rollen. Zie de illustraties op de doos voor informatie over het verwijderen van de printer uit de verpakking. Het verpakkingsmateriaal verwijderen.
GSG-C8546-90960-XLWW.fm Page 30 Wednesday, April 30, 2003 5:09 PM 3 1 hp color LaserJet 9500hdn 2 3 4 5 6 hp color LaserJet 9500n Beide HP color LaserJet 9500 serie printers worden geleverd met lade 1, lade 2 en lade 3. Het model HP color LaserJet 9500hdn beschikt ook over lade 4. Open elke lade en verwijder het oranje plakband van de bovenrand aan de binnenzijde van de lade, alsmede het oranje kunststof opvulmateriaal in de lade. N.B.: Zie pagina 34 voor meer informatie over de plaats van de laden.
GSG-C8546-90960-XLWW.fm Page 31 Wednesday, April 30, 2003 5:09 PM 7 8 4 8 9 355 mm (14.0 inches) 465 mm 682 mm (26.9 inches) (18.3 inches) 455 mm 767 mm (30.2 inches) (17.9 inches) 10 11 hp color LaserJet 9500n 12 Svenska Norsk Nederlands 887 mm (34.
GSG-C8546-90960-XLWW.fm Page 32 Wednesday, April 30, 2003 5:09 PM 355 mm (14.0 inches) 465 mm (18.3 inches) 455 mm 767 mm (30.2 inches) (17.9 inches) hp color LaserJet 9500hdn 682 mm (26.9 inches) 1212 mm (47.8 inches) De afmetingen van de HP color LaserJet 9500hdn staan hierboven aangegeven (in een boven- en vooraanzicht). Voor geschikte omgeving zorgen.
GSG-C8546-90960-XLWW.fm Page 33 Wednesday, April 30, 2003 5:09 PM Svenska Norsk Nederlands 5 De plaats controleren op de aanwezigheid van een adequate netstroomvoorziening. Bepaal de juiste netspanning voor de printer door de spanningswaarde te controleren (aangegeven op een etiket op de achterzijde van de printer). De printer vereist een spanningscircuit van 15-ampère, 100- tot 127-volt of 10-ampère, 220- tot 240-volt. De linkerbak installeren. 1) Verwijder de linkerbak uit de verpakking.
GSG-C8546-90960-XLWW.fm Page 34 Wednesday, April 30, 2003 5:09 PM 8 1 6 2 9 3 4 10 5 6 12 13 7 14 16 11 15 17 De onderdelen van de printer herkennen. De printer bestaat uit de volgende onderdelen.
GSG-C8546-90960-XLWW.fm Page 35 Wednesday, April 30, 2003 5:09 PM 7 8 1 2 Svenska Norsk Nederlands 3 Installeer de HP gids voor voorbeeldpapier (optioneel). 1) Verwijder de gids voor voorbeeldpapier uit de verpakking. 2) Open de linker voorste klep van de printer. 3) Schuif het achterblad van de gids voor voorbeeldpapier in de sleuf zoals aangegeven op de klep. N.B.: Het is mogelijk dat deze gids al op uw printer is geïnstalleerd. Accessoires installeren.
GSG-C8546-90960-XLWW.fm Page 36 Wednesday, April 30, 2003 5:09 PM 9 Installeer de vier inktcatridges. N.B.: Voordat u begint, adviseren wij u om uw sierraden af te doen, deze kunnen blijven haken aan onderdelen in de printer. 1) Open de voorste kleppen van de printer. 2) Lokaliseer de blauwe hendel die overeenkomt met de gele inktcartridge en draai de hendel naar rechts. 3) Haal de gele cartridge uit de verpakking. N.B.
Svenska Norsk Nederlands GSG-C8546-90960-XLWW.fm Page 37 Wednesday, April 30, 2003 5:09 PM 4) Houd de cartridge zo dat deze zich recht voor de lege sleuf bevindt, waarbij de pijl op de patroon dezelfde richting op wijst als de pijl boven de lege sleuf. Schuif de cartridge in de printer totdat deze vastklikt. N.B.: Wanneer de cartridge niet in de sleuf past, controleer dan of u de juiste kleurencartridge in de juiste sleuf installeert. 5) Schuif de blauwe hendel naar links tot deze op zijn plaats klikt.
GSG-C8546-90960-XLWW.fm Page 38 Wednesday, April 30, 2003 5:09 PM 10 3 2 4 Installeer de transferreiniger voor afbeeldingen. 1) Verwijder de transferreiniger voor afbeeldingen uit de verpakking. N.B.: Controleer of de grote, groene hendel omhoog staat. 2) Breng de geleider boven op de transferreiniger voor afbeeldingen op één lijn met de uitsparing in de printer. 3) Steek de transferreiniger met gebruik van de blauwe hendel stevig in de printer totdat deze vastklikt.
GSG-C8546-90960-XLWW.fm Page 39 Wednesday, April 30, 2003 5:09 PM 12 11 Svenska Norsk Nederlands 2 Installeer de toner verzamelfles. 1) Haal de toner verzamelfles uit de verpakking. 2) Schuif de toner verzamelfles naar beneden en klik deze vast tegen de printer. N.B.: Als de fles niet vastklikt, controleert u of de blauwe hendel van de transferreiniger en de groene hendel omhoog staan. De vier afbeeldingsdrums installeren. 1) Draai de grote, groene hendel omlaag. Sette inn tonerbeholderen.
GSG-C8546-90960-XLWW.fm Page 40 Wednesday, April 30, 2003 5:09 PM 2) Draai de blauwe draaiknop omhoog totdat deze klikt en de klep van de afbeeldingsdrum wordt ontgrendeld. Open volledig de klep van afbeeldingsdrum. 3) Haal de gele afbeeldingsdrum uit de verpakking. N.B.: Verwijder tot stap 6 niet de beschermende schuifklep aan de onderzijde van de drummodule en raak niet het groene onderdeel in de drumcartridge aan.
Nederlands 5) Let erop dat de vier blauwe hendels boven de klep van de afbeeldingsdrum in horizontale positie staan. Houd de gele drum zo dat deze zich recht voor de juiste sleuf bevindt, waarbij de pijl richting de sleuf wijst. Laat het einde van de drum vlak op de klep van de afbeeldingsdrum rusten. N.B.: De vier blauwe hendels moeten in horizontale positie staan zodat de afbeeldingsdrums kunnen worden geïnstalleerd. 4) Sett trommelen på et flatt underlag.
GSG-C8546-90960-XLWW.fm Page 42 Wednesday, April 30, 2003 5:09 PM 6) Houd de grijze beschermklep met één hand op zijn plaats en gebruik de palm van uw andere hand om de drum stevig en volledig in de printer te schuiven. N.B.: Wanneer de drum niet in de sleuf past, controleer dan of u de juiste kleurendrum in de juist sleuf installeert en dat u de drum goed hebt uitgelijnd. 7) Herhaal deze procedure om de drie resterende afbeeldingsdrums te installeren.
GSG-C8546-90960-XLWW.fm Page 43 Wednesday, April 30, 2003 5:09 PM 13 8 8) Draai de blauwe draaiknop omlaag totdat deze stopt. 9) Draai de grote groene hendel omhoog. 10) Sluit de voorste kleppen. Laad het afdrukmateriaal in lade 2 en 3. 1) Trek de lade zo ver mogelijk naar buiten. 2) Laad het afdrukmateriaal met de afdrukzijde omlaag waarbij de bovenzijde wijst naar de achterkant van de lade.
GSG-C8546-90960-XLWW.fm Page 44 Wednesday, April 30, 2003 5:09 PM 3 5 4 3) Schuif de linker papiergeleider zodanig dat deze overeenkomt met het formaat afdrukmateriaal dat wordt geladen. 4) Schuif de voorste papiergeleider zodanig dat deze overeenkomt met het formaat afdrukmateriaal dat wordt geladen. 5) Stel de schakelaar Aangepast/Standaard in op STANDARD. N.B.
GSG-C8546-90960-XLWW.fm Page 45 Wednesday, April 30, 2003 5:09 PM 14 15 1 2 3 4 5 6 1 Svenska Norsk Nederlands 2 Het bedieningspaneelsjabloon wijzigen (optioneel). Indien gewenst, vervangt u de geïnstalleerde sjabloon door de sjabloon die bij de printerverpakking is geleverd. 1) Plaats een klein scherp voorwerp in de uitsparing boven de sjabloon en til deze op. 2) Lijn de nieuwe sjabloon uit met de uitsparingen op het bedieningspaneel, draai de sjabloon in de juiste positie en klik hem vast.
GSG-C8546-90960-XLWW.fm Page 46 Wednesday, April 30, 2003 5:09 PM 1 2 3 7 8 9 10 11 12 13 7) knop TAAK ANNULEREN, 8) groen klaar-lichtje 9) groen gegevenslichtje 10) amberkleurig attentielichtje 11) knop HELP 12) knop OMMLAAG 13) knop WISSEN. Voor meer informatie over het bedieningspaneel, zie de gebruikershandleiding (in het mapje op de voorklep van de printer). De statuslichtjes Benodigdheden begrijpen.
GSG-C8546-90960-XLWW.fm Page 47 Wednesday, April 30, 2003 5:09 PM 16 1 Nederlands De taal van het bedieningspaneel wijzigen (optioneel). Volg de volgende instructies om de berichten in het uitleesvenster op het bedieningspaneel te wijzigen in uw taal: 1) Wanneer LANGUAGE = bericht (knop OMHOOG) of (knop OMLAAG) om naar verschijnt, gebruikt u uw taal te bladeren in het uitleesvenster en druk vervolgens op (SELECTEREN). (vervolg) Koble til strømkabelen og slå på skriveren.
GSG-C8546-90960-XLWW.fm Page 48 Wednesday, April 30, 2003 5:09 PM De printer wordt ingeschakeld. N.B.: Deze instructies zijn van toepassing als u de printer voor de eerste keer inschakelt. Zie de naslaggids voor de gebruiker op de CD-ROM voor informatie over het wijzigen van de taal op het bedieningspaneel nadat de printer voor de eerste keer wordt ingeschakeld.
GSG-C8546-90960-XLWW.fm Page 49 Wednesday, April 30, 2003 5:09 PM Svenska Norsk Nederlands 17 N.B.: Wanneer de pagina niet wordt afgedrukt, controleert u op het bedieningspaneel of er foutberichten verschijnen en volg vervolgens de instructies in het uitleesvenster om de eventuele fouten op te lossen. Druk op (knop HELP) voor aanvullende hulp of zie de nasslaggids voor de gebruiker op de CD-ROM voor informatie over probleemoplossing. Druk een demopagina af om te controleren of de printer werkt.
GSG-C8546-90960-XLWW.fm Page 50 Wednesday, April 30, 2003 5:09 PM 19 18 1 2 De interface printerkabel aansluiten. 1) Wanneer uw HP color LaserJet 9500 serie printer wordt aangesloten op een enkele computer, sluit dan een parallelle kabel aan op de parallelle kabelconnector aan de achterzijde van de printer. 2) Wanneer uw printer wordt aangesloten op een netwerk, sluit dan een netwerkkabel aan op de HP Jetdirect printserver RJ-45 connector aan de achterzijde van de printer.
GSG-C8546-90960-XLWW.fm Page 51 Wednesday, April 30, 2003 5:09 PM Nederlands 3) Klik met de rechtermuisknop op het pictogram HP color LaserJet 9500 serie printer, en klik vervolgens op Eigenschappen. 4) Op het tabblad Algemeen, klikt u op Testpagina afdrukken. Wanneer de testpagina wordt afgedrukt, is de printersoftware juist geïnstalleerd. Wanneer de testpagina niet wordt afgedrukt, is de software-installatie mislukt en moet u de software opnieuw installeren. Teste programvareinstallasjonen.
GSG-C8546-90960-XLWW.fm Page 52 Wednesday, April 30, 2003 5:09 PM Gefeliciteerd! De printer is klaar voor gebruik. Zie de naslaggids voor de gebruiker op de CD-ROM voor instructies over het configureren van de printer en de eventuele accessoires die u hebt aangeschaft en voor meer informatie over de beschikbare functies in de HP color LaserJet 9500 serie printer. N.B.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
GSG-C8546-90960-XLWW.
copyright © 2003 Hewlett-Packard Company http://www.hp.