HP Scanjet Enterprise 7000n , HP Color LaserJet CP5525, HP Color LaserJet CM4540 MFP and HP LaserJet M4555 MFP - HP Imaging and Printing Security Best Practices

Chapter 3 HP LaserJet and Color LaserJet MFP Security Checklist 16
Enable WINS Port
The Enable WINS Port setting enables/disables the port used for WINS name resolution.
To enable the WINS Port:
1. Browse to the Embedded Web Server for the target device.
2. Select the Networking tab.
3. Choosing Other Settings from the left hand menu.
4. Checking the box for Enable WINS Port (
Figure 10).
Figure 10: Enable WINS Port by selecting check box.
TFTP Configuration File
BOOTP is a protocol that provides a method for a network host to obtain an IP address and
configuration information from a BOOTP server. Jetdirect supports the BOOTP protocol. When
enabled, Jetdirect sends a BOOTP message onto the network. A properly configured BOOTP server
responds to the message with an IP address that Jetdirect can use. In addition to providing an IP
address, the BOOTP server can also provide the location of a TFTP configuration file for automatic
configuration of Jetdirect. When the TFTP Configuration File setting is enabled, Jetdirect attempts to
retrieve the TFTP configuration file from the server containing the file through the TFTP protocol.
To enable the use of the TFTP Configuration File:
5. Browse to the Embedded Web Server for the target device.
6. Select the Networking tab.
7. Choosing Other Settings from the left hand menu.
8. Checking the box for TFTP Configuration File (
Figure 11).