HP Scanjet Enterprise 7000n , HP Color LaserJet CP5525, HP Color LaserJet CM4540 MFP and HP LaserJet M4555 MFP - HP Imaging and Printing Security Best Practices

Chapter 4 HP LaserJet and Color LaserJet MFP Security Checklist 22
Setting up HP Web Jetadmin
Follow these instructions to prepare Web Jetadmin for configuring the MFPs:
Open Web Jetadmin to view the device list (Figure 13) that appears by default.
Figure 13: Web Jetadmin showing the device list on the default view.
Check to see that the print devices you wish to configure appear in the Device Model
List. If they are not in the list, use the Discovery options to find the print devices on your
network.
Note:
This checklist does not include details on print device discovery. See
Web Jetadmin user guidance for more information. In most cases, the
devices will already appear in the default view of Web Jetadmin. It is
possible for Web Jetadmin to lose contact temporarily with a device that
is configured for DHCP. Use the Discovery options to restore contact, or
configure the devices with static IP addresses.
Hold down the CTRL key and click to select the printers or MFPs to configure in the Device
List view (Figure 14).
Figure 14: The Device List showing multiple devices selected.