HP Scanjet Enterprise 7000n , HP Color LaserJet CP5525, HP Color LaserJet CM4540 MFP and HP LaserJet M4555 MFP - HP Imaging and Printing Security Best Practices

Chapter 4 HP LaserJet and Color LaserJet MFP Security Checklist 29
Configuring Device Settings
The Device category includes settings that affect some of the normal use of the print device. The
following settings affect how jobs are stored, and how long your print device will wait before a job
times out in a particular way.
1. Click the Device category on the Config tab, to view the following configuration options:
I/O Timeout to End Print Job
The I/O Timeout to End Print Job allows you to specify the amount of time a device should wait
between packets before canceling a job. Setting this timeout will help prevent jobs formed or sent
incorrectly from tying up a print resource. To set this timeout follow the instructions below.
From the Device category select the I/O Timeout to End Print Job menu (Figure 23).
Click checkbox to enable the I/O Timeout to End Print Job setting, and select a
reasonable time the print device should wait between data packets.
Figure 23: The I/O Timeout to End Print Job options.
Input Auto Continue Timeout
The Input Auto Continue Timeout allows you to specify the amount of time a device should wait
before performing the default action when the specified media size for a job is not available.
Setting this timeout will help prevent jobs sent with improper paper or media selections from tying
up a print resource. To set this timeout follow the instructions below.
From the Device category select the Input Auto Continue Timeout menu.
Click checkbox to enable the Input Auto Continue Timeout setting, and select a
reasonable time the print device should wait between data packets.