HP Scanjet Enterprise 7000n , HP Color LaserJet CP5525, HP Color LaserJet CM4540 MFP and HP LaserJet M4555 MFP - HP Imaging and Printing Security Best Practices

Chapter 4 HP LaserJet and Color LaserJet MFP Security Checklist 37
Feature Recommended
Setting
Explanation
EWS Config Disabled***
***NOTE:
The recommendation is to
disable EWS Config, but you
should leave it enabled until
you are finished configuring
this checklist. Otherwise, it will
prevent you from configuring
some of the remaining settings.
Disabling EWS Config closes
down the EWS and it
eliminates the configuration
settings that are controlled by
the EWS. It also removes the
affected settings from Web
Jetadmin menus. This includes
settings for email, send to
folder, and fax. You should
disable EWS Config while the
MFPs are in use, and enable it
only to make changes to the
affected configurations.
Telnet Config Disabled
Disabling Telnet Config
prevents access to
configuration settings and
other features through Telnet.
SLP Config Disabled
Disabling SLP Config
prevents access to
configuration settings and
other features through SLP.
FTP Printing Disabled
Disabling FTP Printing
prevents access to
configuration settings and
other features through FTP. It
also prevents printing through
FTP.
LPD Printing Disabled
Disabling LPD Printing
prevents access to
configuration settings and
other features through LPD. It
also prevents printing through
LPD.
9100 Printing Enabled
9100 Printing is the access
point for normal printing
through standard HP print
drivers.
IPP Printing Disabled
Disabling IPP Printing
prevents access to
configuration settings and
other features through the IPP.
It also prevents printing
through IPP.