HP Color LaserJet CP5220 Series - Media

HP Color LaserJet CP5220 Series Printer – Media

Development Company, L.P.

www.hp.com

Load Trays

How do I? Steps to perform

Load Tray 1

1 Open Tray 1.

2 If loading long sheets of media, pull out the extension

tray.

3 Extend the paper guides fully and then load the media

stack into Tray 1. Adjust the paper guides to the size

of the paper.

NOTE: Place the media into Tray 1 with the side to be

printed on face-down and either the top (rotated

media) or right edge toward the product.

PAGE 1
HP Color LaserJet CP5220 Series Printer – Media Load Trays How do I? Load Tray 1 Steps to perform 1 Open Tray 1. 2 If loading long sheets of media, pull out the extension tray. 3 Extend the paper guides fully and then load the media stack into Tray 1. Adjust the paper guides to the size of the paper. NOTE: Place the media into Tray 1 with the side to be printed on face-down and either the top (rotated media) or right edge toward the product. 1 ©2009 Copyright Hewlett-Packard Development Company, L.P.
PAGE 2
HP Color LaserJet CP5220 Series Printer – Media How do I? Load Tray 2 or 3 Steps to perform 1 Pull the tray out of the product. 2 Slide open the paper length and width guides. 3 Place the paper face-up in the tray and make sure that it is flat at all four corners. Slide the paper length and width guides so that they are against the stack of paper. NOTE: The following sizes should not be rotated: letter, A4, Executive, and B5 (JIS).
PAGE 3
HP Color LaserJet CP5220 Series Printer – Media How do I? Steps to perform 4 Push down on the paper to make sure that the paper stack is below the paper limit tabs on the side of the tray. 5 Slide the tray into the product. 3 ©2009 Copyright Hewlett-Packard Development Company, L.P. www.hp.