HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

mfShadowImageVolumeType=S-VOL
mfUniversalReplicatorVolumeType=Simplex
mfUniversalReplicatorPoolID=-1
thpPoolID=-1
threshold=-1
systemDisk=0
encrypted=0
*****: The values are encoded by the CLI.
GetStorageArray (subtarget=Path)
GetStorageArray (subtarget=Path) obtains the information about paths.
Parameters
Table 55 GetStorageArray (subtarget=Path) command parameters
DescriptionStatusParameter name
Specify Path.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Object ID of the path
Specify this parameter when you want to obtain information about
a specific path. If you specify this parameter, you must also specify
the model and serialnum parameters. If you specify the model
and serialnum parameters and omit the objectid parameter,
information about paths for the specified storage system is
obtained. Specify the objectID obtained from another CLI
response. The value is encoded by the CLI.
Optional
objectid
Specific information about the path
The values you can specify are HostInfo and WWN. If you specify
multiple values at the same time, separate the values by commas.
Optional
pathsubinfo
CLI Reference Guide 143