HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

Format
When modifying information about a virtualization server:
hdvmcli [URL] ModifyVirtualizationServer [options]
hostname=host-name-of-virtualization-server [ipaddress=IP-address]
[hostprotocol={Secure|Non-secure}] [hostuserid=user-ID]
[hostuserpassword=user-password]
Parameters
Table 90 ModifyVirtualizationServer command parameters
DescriptionStatusParameter name
Host name of the virtualization server whose information is to be
modified
Required
hostname
IP address
Specify this parameter if you want to modify the IP address of the
virtualization server or the virtualization-server management
program.
To specify the IP address of the virtualization server, use an IPv4
address. To specify the IP address of the virtualization-server
management program, use either an IPv4 or IPv6 address.
Optional
#
ipaddress
Protocol of the virtualization server or virtualization server
management program
Specify this parameter if you want to modify the protocol.
You can specify either of the following values:
• Non-secure: HTTP communication
• Secure: HTTPS communication
Optional
#
hostprotocol
User ID
Specify this parameter if you want to modify the user ID used to
access the virtualization server or the virtualization-server
management program.
Optional
#
hostuserid
User password
Specify this parameter if you want to modify the password for
the user ID specified in hostuserid.
Optional
#
hostuserpass-
word
#
You need to specify at least one of the following parameters: ipaddress, hostprotocol,
hostuserid, or hostuserpassword.
Parameter values to obtain in advance
hostname: Obtain this value from the execution result of the GetHost command. Execute this
command by specifying VMWARE_ESX for the hostfilter parameter. In the execution result of this
command, the name value appears under An instance of Host. In the hostname parameter,
specify the name value for the virtualization server whose information you want to modify.
Device Manager CLI command reference242