HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Device number of the S-VOL
This parameter can be specified in decimal, and in
colon-separated hexadecimal. If you specify a hexadecimal
number, for XP12000/XP10000/SVS200, use the xx:yy format,
where xx is the CU number, and yy is the LDEV number. For
P9500 or XP24000/XP20000, use the ww:xx:yy format, where
ww is the LDKC number, xx is the CU number, and yy is the LDEV
number. ww is optional. If you omit ww, the LDKC number is
regarded as 0.
The execution results are output in decimal.
Required
svoldevnum
Port ID in the HORCM configuration file that manages the S-VOL
paths
If you specify this parameter, specify either svolportid or
svolportname. Do not specify both parameters at the same
time. If they are specified at the same time, an error will occur.
Optional
svolportid
Port name in the HORCM configuration file that manages the
S-VOL paths
If you specify this parameter, specify either svolportid or
svolportname. Do not specify both parameters at the same
time. If they are specified at the same time, an error will occur.
Optional
svolportname
Pool ID of the pool in which the differential data and journal data
for the S-VOL is to be stored
You must specify this parameter when you are using method 2
or 3 with Continuous Access Journal Software or Continuous
Access Asynchronous Software.
For other cases, this parameter value is invalid even if you specify
a value.
Optional
svolpoolid
Type of operation that is to be executed with the copy pair
You can specify the following values:
• BusinessCopy: Execute Business Copy Software.
• ContinuousAccessSync: Execute Continuous Access
Synchronous Software.
• ContinuousAccessAsync: Execute Continuous Access
Asynchronous Software.
• Snapshot: Execute Snapshot.
• ContinuousAccessJournal: Execute Continuous Access
Journal Software.
The default value is as follows:
• When P-VOL and S-VOL are located in the same storage sys-
tem: BusinessCopy
• When P-VOL and S-VOL are located in different storage sys-
tems: ContinuousAccessAsync
Optional
replication-
function
Device Manager CLI command reference264