HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)
DescriptionAttribute
Domain type of the host storage domain
0 (host group) is output.
domainType
Port name of the host storage domain
portName
IPAddress instance
The IPAddress instance is output when the GetStorageArray (subtarget=PortController)
command (see “GetStorageArray (subtarget=PortController) ” on page 158) is executed.
Table 117 IPAddress instance attribute
DescriptionAttribute
IP address of the port controller
This item is output when NAS is created.
ipAddress
LDEV instance
The LDEV instance is output when the following commands are executed:
• “AddLogicalUnit” on page 55
• “AddLun” on page 200
• “AddLUSE” on page 61
• “AddVirtualVolume” on page 76
• “FormatLU” on page 95
• “GetStorageArray (subtarget=ArrayGroup) ” on page 111
• “GetStorageArray (subtarget=LDEV) ” on page 129
• “GetStorageArray (subtarget=LogicalUnit) ” on page 134
• “GetStorageArray (subtarget=MFReplicationInfo) ” on page 139
• “GetStorageArray (subtarget=Pool) ” on page 149
Table 118 LDEV instance attributes
DescriptionAttribute
Object ID of the LDEV
objectID
LDEV name
This item is output if it has been registered.
name
Device number of the LDEV
For P9500 or XP24000/XP20000, a combination of a logical DKC number, a
CU number, and an LDEV number
(=logical-DKC-number*65536+CU*256+LDEV) is output.
For XP12000/XP10000/SVS200 or XP1024/XP128, a combination of a CU
number and an LDEV number (=CU*256+LDEV) is output.
devNum
Display name of the LDEV
displayName
Device Manager CLI command reference294