HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
Usage rate threshold of the virtual volume
One of the following values is output for P9500 or XP24000/XP20000:
When the LDEV is a THP volume: usage rate threshold value of the THP
volume
#1, #2
-1 is output for volumes other than THP volumes.
#1 When the THP volume is not assigned to a THP pool, -1 is displayed.
#2 When the operator is a partitioned storage administrator, -1 is displayed.
-1 is output for other storage systems.
threshold
Indicates whether the LDEV is being used as a system drive.
One of the following values is output for P9500 or XP24000/XP20000:
• -1: Unknown
• 0: Not being used as a system drive
• 1: Being used as a system drive
0 is output for other storage systems.
systemDisk
Name of the parity group to which the LDEV belongs
GroupName
Indicates whether the data that is stored in the LDEV is encrypted.
One of the following values is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200:
• 0: The data is not encrypted.
• 1: The data is encrypted.
-1 is output for other storage systems.
encrypted
Capacity (KB) that has been assigned to THP volumes from the hardware tier
whose ID (tierID) is 0
thpTier0ConsumedCpa-
cityInKB
Capacity (KB) that has been assigned to THP volumes from the hardware tier
whose ID (tierID) is 1
thpTier1ConsumedCpa-
cityInKB
Capacity (KB) that has been assigned to THP volumes from the hardware tier
whose ID (tierID) is 2
thpTier2ConsumedCpa-
cityInKB
LogicalDKC instance
The LogicalDKC instance is output when the GetStorageArray (subtarget=LogicalDKC)
command (see “GetStorageArray (subtarget=LogicalDKC) ” on page 132) is executed.
Table 119 LogicalDKC instance attributes
DescriptionAttribute
Logical DKC number
logicalDKCNumber
Serial number of the logical DKC recognized by a mainframe host
mfLogicalSerialNum-
ber
CLI Reference Guide 299