HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
Serial number of the drive
This item is not output.
serialNumber
Type of the storage system containing the physical device
One of the following values is output:
• P9500: P9500
• XP24K: XP24000/XP20000
• XP12K/10K/SVS200: XP12000/XP10000/SVS200
• XP1024/128: XP1024/XP128
dkuType
Drive revolutions per minute
This information is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200.
0 or -1 is output if the drive revolutions are unknown.
rpm
Currently, this information does not apply to storage systems (-1 is output).diskType
ID of the PDEV
pdevid
Name of the parity group to which the PDEV belongs
arrayGroupName
Currently, this information does not apply to storage systems.
diskModelSize
Currently, this information does not apply to storage systems (-1 is output).encrypted
Pool instance
The Pool instance is output when the following commands are executed:
• “AddPool” on page 65
• “GetPoolShrinkStatus” on page 100
• “GetStorageArray (subtarget=Pool) ” on page 149
• “ModifyPool” on page 170
• “ShrinkPool” on page 193
NOTE:
The attributes thresholdVolForewarn and thresholdVolOverwarn, which were supported
in version 6.2, have changed to overProvisioningWarning and overProvisioningLimit,
respectively. Check and, if necessary, revise the script that you use in version 6.3 or later.
Table 128 Pool instance attributes
DescriptionAttribute
Object ID of the Pool instanceobjectID
Name of the pool
This is output if the name has been registered.
name
Device Manager CLI command reference310